Lighting

The four low voltage halogens from IKEA are now installed.

IMG_0264.JPG

The plastic mounts have been stripped off and discarded and the lamps are mounted on 6mm ply screwed to short battens which slot in behind the backscene. The wire was later terminted in chocky blocks which make it easier to string the lamps together in parallel. After the exhibition, these will probably be replaced with some sort of plug & socket system.

IMG_0265.JPG

The lamps in position:

IMG_0261.JPG

As you can see, there is now some more grass on the hills! The surfeit on the tracks has now been hoovered up…

Origins

It’s three or four years now since the stock from our 0-16.5 layout Upper Creek was stolen in a break in. The frequently exhibited layout was showing signs of age, and so it was finally retired, and a new project was needed. Some club members hadn’t shaken off the narrow gauge bug, and coincidentally we had acquired a few items of 009 stock, together with a handful of turnouts and some lengths of peco track. So it was that the Dufftown came into being.

The original plan utilised the fiddle yard from Upper Creek, a board measuring 3’6″ by 2′ made from a 4″ plywood frame topped with sundeala. The specification included the following requirements:

  • The layout would be modular – that is, it the first board would be self contained and could be finished before the next board was added; this could be finished and form a complete layout with the first while the next board was developed and so forth….
  • The finished layout would incorporate a loop for round and round running. 009 stock, particular that which we had inherited, can be temperamental in running, and a circuit would allow good “running in”. It’s also one of the advantage 009 offers and we wanted to use it!
  • Points would be motorised to allow full operation from either the rear of the layout (for exhibitions) or from the front (for recreational running). It was to be a club layout, despite the fact that relatively few members have 009 stock!

To a greater or lesser extent all of these aims have been realised.

The setting of the layout was chosen to be Scotland because there are many narrow gauge models featuring Welsh lines. It is true there are fewer Scottish prototypes so a little modellers’ licence was applied, of which more will be posted soon… But the temptation of modelling a whisky railway was too great to resist, and so even at this stage it was clear the next board, whenever it was built, would have to include a distillery…

Railway Walks: The Whisky Train

The BBC Four series featured a walk along the trackbed of the Strathspey Railway from Craigellachie to Ballindalloch last week. It’s available to view on iPlayer (if you’re in the UK) until Thursday and visits several sites that helped inspire the model Dufftown. The programme does not feature Dufftown itself, although there is a detour from the Speyside way which runs along the old trackbed from Craigellachie up the Glen Fiddich to Dufftown.

IKEA: Model Railway Supplier

Even though there’s still plenty to do scenery wise, there will be no time for cosmetic touches such as lighting before the exhibition unless it happens now. So it’s off to IKEA on the trams.

IMG_0259.JPG

Why IKEA? To try and avoid extra weight and complexity there will be no pelment. So low voltage halogen, ideally mounted directly onto the baseboard, could be a simple but effective solution.

IMG_0253.JPG

The Layout Design

Dufftown is a 4mm scale model of a narrow gauge railway: 009 is 9mm gauge (the same as N) representing 2′ 3″ gauge in the “real” world (though often used to represent any narrow gauge from around 1′ 10″ to 2′ 6″). The layout is 2′ x 7′ and incorporates a full circuit of track, a small station, a three loop fiddle yard, and low level industrial distillery sidings. Scenic features include distillery buildings, a wee burn and a two-span viaduct.
Draft Layout Plan (Dufftown)
It is designed to allow operation from either the front or the rear of the layout, so it can be seen by the operators during “recreational” running as well as being exhibited.

There are two boards each 3’6″ long. The station board (left) was constructed first and can actually be operated as a self contained layout. It is near completion, with details, buildings and back-scene still to be completed. The distillery board (right) is under construction, with the track laid and partially ballasted and some of the scenery formed.

Dufftown: A Narrow Gauge Whisky Railway

On 8/9th November 2008 the Brighton Model Railway Club‘s narrow gauge model Dufftown will be exhibited for the first time at our exhibition in Patcham. That’s just under three weeks away, and the layout’s no where near ready yet! On this site details will be posted of the layout, the background and story of its construction, and updates its current state… Expect a lot of changes in the coming weeks.